How to Make Dulce De Leche

Dulce de leche (pronounced "DOOL-se de LE-che," meaning candy of milk) is a rich syrup similar in flavor to caramel. It is a common ingredient in South American desserts. If you want to add a delicious sweet flavor to your desserts, it's easy to make your own dulce de leche at home. Most recipes involve boiling or baking condensed milk until it reduces into a syrup. You can also use regular milk mixed with sugar to produce dulce de leche.

[Edit]Steps

[Edit]Boiling Condensed Milk

1. Peel the label off of a can of sweetened condensed milk. Search your supermarket for sweetened condensed milk. It is usually in the baking section. Take off as much of the label as you can. For the sticky portion, you can use a wet sponge to scrub the remainder of the label off.^[1]
   
   • Read the cans carefully. Containers for condensed milk look very similar to evaporated milk, and evaporated milk won’t work for making dulce de leche.
   • Get multiple cans if you want to make more dulce de leche.
2. Place the can in a pot and cover it with water. Stand the can on the bottom of the pot. Then add water until the water is at least above the top of the can. Make sure the pot is tall enough that you can completely cover the can with water while it’s standing up.^[2]
   
   
   • Don’t fill the pot all the way to the top or it could overflow when the water starts boiling.
   • Depending on the size of the pot, you can put multiple cans in here at the same time for even more dulce de leche.
   • The water can be any temperature, but pouring in water that is already hot will make the water boil faster.
3. Bring the water to a boil over high heat. Turn on a high flame and wait for the water to boil. When bubbles start rising to the surface, you know the water is boiling. At this point, reduce the flame and let the pot simmer.^[3]
   
   
4. Let it simmer for 2-3 hours on a low flame. Once the water has boiled, reduce the flame to a low setting. This should bring the water to a light simmer. Let the pot simmer for 2 to 3 hours, depending on how dark you want your dulce de leche.^[4]
   
   
   
   • The longer you let the condensed milk simmer, the darker the dulce de leche will be. If you prefer lighter dulce de leche, take the cans out after 2 hours. Wait longer if you want a darker dulce de leche.
5. Use tongs to remove the can from the water. Once the can has boiled long enough, remove it with a pair of tongs. This stops the cooking process so your dulce de leche is exactly how you want it.^[5]
   
   
6. Let the can cool completely before opening it. After you remove the can, set it down somewhere safe and let it cool. This could take several hours.^[6]
   
   
   
   • Do not attempt to open the can while it’s still hot. The contents are under pressure, and opening it too early could cause hot dulce de leche to spray out and burn you.
   • When you do open the can, the dulce de leche should have a thick, syrupy consistency and pour out easily.
7. Store the sealed can at room temperature for up to 3 months. An unopened can of dulce de leche will stay fresh for up to 3 months at room temperature. Simply place the can in your cupboard and use it when you want to.^[7]
   
   • If you’ve opened the can, you can pour it into an airtight container and refrigerate it for up to 3 weeks.

[Edit]Cooking Condensed Milk in the Oven

1. Pour condensed milk into an x baking dish. Open up the can and empty its contents into the dish. Spread the milk around with a spoon or spatula if it doesn’t cover the entire bottom of the dish.^[8]
   
   
   • You can pour in multiple cans for this method for a bigger serving of dulce de leche. Just be careful not to overflow the baking pan.
2. Cover the baking dish with tin foil. Rip off a layer of tin foil large enough to cover the dish. Use more than one sheet if you have to. Tuck the foil under the sides of the dish so it stays secure during the baking process.^[9]
   
   
3. Place the baking dish inside a larger baking dish. This larger dish should be large enough so the smaller dish can sit in it comfortably. It should also have taller sides than the smaller dish so it doesn't overflow when you add water.^[10]
   
   
   
   • For an x bowl, a x would be large enough.
4. Add water until it reaches ¾ the height of the smaller dish. This water surrounds the original dish so when it starts boiling, the water reduces the sugar in the condensed milk.^[11]
   
   
   • This water can be any temperature, but if it’s already hot, it will make the boiling process faster.
5. Bake the milk at for 90 minutes. Keep an eye on the water level as the milk bakes. If water is evaporating, use a pitcher to add more so it stays at the desired level.^[12]
   
   
   
   • If you feel unsteady transferring a dish full of water to the oven without spilling it, you can put the dishes in the oven without the water. Then use a pitcher to fill the dish.
6. Remove the dishes from the oven and stir the milk. After 90 minutes, the condensed milk should break down enough and produce dulce de leche. Complete the job by removing the foil covering. Then use a spatula or spoon to stir the syrup until it combines. Break down any solid pieces that have formed.^[13]
   
   
   • The dulce de leche should have a thick, syrupy consistency and have a similar color to caramel.
   • You could also pour the milk into a blender for a more thorough mixing.
7. Refrigerate the dulce de leche for up to 3 weeks. If you don’t use the dulce de leche right away, you can store it in the refrigerator. Store the mixture in an airtight container or jar and place it in the refrigerator. It should last 3 weeks if properly stored.^[14]
   
   
   

[Edit]Making Dulce de Leche with Regular Milk

1. Pour 1 quart (0.9 liters) of whole milk into a pot. Make sure this pot is large enough so the milk won’t over flow when it starts boiling. 1 quart (0.9 liters) of milk will produce about 1 cup (0.24 liters) of dulce de leche, so use more milk if you need more dulce de leche.^[15]
   
   
   • You can also use different types of milk for a different taste. Coconut milk works for a vegan option, and goat milk produces a different flavor.^[16]
2. Add 1 cup (128 g) of sugar. If you prefer your dulce de leche even sweeter, you can add 1 ¼ cups (160 g) of sugar. If you prefer it less sweet, add only ¾ cup (96 g) of sugar.^[17]
   
   
   • If you’d like, you can also add some vanilla for flavor. Put either a split vanilla bean or of vanilla extract.
3. Stir the mixture over a medium flame. Place the pot on the stove over a medium flame. Stir until all the sugar has dissolved.^[18]
   
   
   • After all the sugar has dissolved, you can stir in 0.25 tsp (5 g) of baking soda to prevent the milk from coagulating. This is optional, but will produce a smoother dulce de leche.
4. Let the milk boil for 90 to 120 minutes, stirring regularly. Once all the sugar has dissolved, leave the pot on a medium flame and allow it to boil. Stir the mixture regularly to help it reduce and prevent it from burning.^[19]
   
   
   
   • As the milk reduces, it will start changing color from white to caramel. This is a good sign and means that your dulce de leche is nearing completion.
   • The amount of time you let the milk boil depends on how dark you like your dulce de leche. If you prefer it lighter, take it off at 90 minutes. If you want it darker, leave it on a full 2 hours.
5. Remove the pot from the heat and let the mixture cool. Place the pot on an unlit burner on the stovetop and allow it to cool. Stir it one final time while it’s cooling.^[20]
   
   
   
   • Making dulce de leche this way may produce more chunks and solid pieces than using condensed milk. This is normal. It will still have a syrupy consistency.
   • If you prefer your dulce de leche extra smooth, you can pour it through a strainer to mix out any solid pieces left behind. This is optional and doesn’t affect the final taste.
6. Pour the mixture into an airtight jar and refrigerate for up to 3 weeks. If you don’t use the dulce de leche right away, you can store it for several weeks. Transfer it into an airtight jar or container and place it in the refrigerator. It can last about 3 weeks if stored properly.^[21]
   
   

[Edit]Things You’ll Need

[Edit]Boiling Condensed Milk

• Can of condensed milk
• Pot
• Stove
• Tongs
• Water

[Edit]Cooking Condensed Milk in the Oven

• Can of condensed milk
• Tinfoil
• 8’ x 8’ and 9’ x 13’ baking dish
• Water
• Jar for storage
• Spatula or spoon

[Edit]Making Dulce de Leche with Regular Milk

• 1 qt of whole milk
• 1 cup of sugar
• Vanilla bean or vanilla extract
• Baking soda
• Cooking pot
• Stove
• Can for storage
• Spatula or spoon

[Edit]Video

[Edit]Related wikiHows

• Make Caramel
• Make Toffee
• Make Sticky Toffee Sauce
• Make Sticky Toffee Pudding
• Make Caramel Apples
• Make Deluxe Hot Chocolate
• Make Brigadeiro
• Make Leche Flan
• Make Raw Yogurt in a Slow Cooker

[Edit]References

[Edit]Quick Summary

1. ↑ https://www.thekitchn.com/what-s-the-difference-between-condensed-and-evaporated-milk-125900
2. ↑ https://www.seriouseats.com/recipes/2015/02/dulce-de-leche-recipe.html
3. ↑ https://www.seriouseats.com/recipes/2015/02/dulce-de-leche-recipe.html
4. ↑ https://www.seriouseats.com/recipes/2015/02/dulce-de-leche-recipe.html
5. ↑ https://www.seriouseats.com/recipes/2015/02/dulce-de-leche-recipe.html
6. ↑ https://www.seriouseats.com/recipes/2015/02/dulce-de-leche-recipe.html
7. ↑ https://www.seriouseats.com/recipes/2015/02/dulce-de-leche-recipe.html
8. ↑ https://melaniemakes.com/how-to-make-dulce-de-leche-from-sweetened-condensed-milk/
9. ↑ https://www.foodnetwork.com/videos/homemade-dulce-de-leche-0266317
10. ↑ https://melaniemakes.com/how-to-make-dulce-de-leche-from-sweetened-condensed-milk/
11. ↑ https://melaniemakes.com/how-to-make-dulce-de-leche-from-sweetened-condensed-milk/
12. ↑ https://melaniemakes.com/how-to-make-dulce-de-leche-from-sweetened-condensed-milk/
13. ↑ https://melaniemakes.com/how-to-make-dulce-de-leche-from-sweetened-condensed-milk/
14. ↑ https://www.seriouseats.com/recipes/2015/02/dulce-de-leche-recipe.html
15. ↑ https://www.foodnetwork.com/videos/dulce-de-leche-0101811
16. ↑ https://food52.com/blog/10049-all-about-dulce-de-leche-and-how-to-make-it
17. ↑ https://food52.com/blog/10049-all-about-dulce-de-leche-and-how-to-make-it
18. ↑ https://food52.com/blog/10049-all-about-dulce-de-leche-and-how-to-make-it
19. ↑ https://food52.com/blog/10049-all-about-dulce-de-leche-and-how-to-make-it
20. ↑ https://food52.com/blog/10049-all-about-dulce-de-leche-and-how-to-make-it
21. ↑ https://www.seriouseats.com/recipes/2015/02/dulce-de-leche-recipe.html

source How to of the Day https://ift.tt/2BZ7JHZ

How to Draw a Brain

The brain is one of the most fun parts of the body to draw. You can make it as simple as you like by drawing lots of squiggles and keeping the shape round. If you want more of a challenge, include anatomical parts, such as the brain stem and cerebellum. Once you've drawn the cartoon or realistic brain, you can go back and add color or label the parts.

[Edit]Steps

[Edit]Sketching an Easy Cartoon Brain

1. Draw a large bean shape to make the outline for the brain. Use a pencil to sketch a kidney bean shape on your paper. You can make the outline for the brain any size you like. To make the kidney bean shape, draw a circle that has an indent at the bottom.^[1]
   
   
   
   • If you prefer, you could draw an oval instead, but make the middle noticeably wider than the ends.
2. Make a half-circle from the bottom that curls into the middle of the brain. To highlight a section of the cartoon brain, place your pencil on the bottom line of the outline near the center where it indents. Draw a half-circle that extends from the bottom into the center so it looks like a curlicue.^[2]
   
   
   • Remember that the brain doesn't need to look realistic since you're making a simple cartoon drawing.
3. Draw 2 to 3 squiggly lines that connect across the brain. The brain is known for looking wrinkly and some of those wrinkles extend across the entire brain. Make a few wiggly lines that move from the outline to the half-circle you just drew or have them touch the opposite side of the brain.^[3]
   
   
4. Sketch lots of small squiggles that don't connect. These will look like wrinkles once you've made them over the entire brain. There's no need to make them all connect to each other, so make your squiggles different sizes and lengths.^[4]
   
   
   • Your lines can extend in from the outline of the brain or you can make them disconnected from the outline.
5. Make the outline thicker to add texture to the brain. Go back and draw over some of the lines you made for the outline to make them bolder and curvy. You can also draw over some of the squiggles so they stand out.^[5]
   
   
   • You can skip this step if you want your cartoon brain to look more 2-dimensional.

[Edit]Drawing a Realistic Brain

1. Draw a horizontal oval that juts out along the bottom line. Lightly sketch an oval that's as large as you want the brain to be. Curve the top of the oval in the middle to make the rounded part of the brain. When you're drawing the bottom line, make it bump out near the middle. The bump should be about 1/3 the size of the brain's length.^[6]
   
   
   • Keep your pencil marks light so you can erase mistakes or go over them with a pen.
2. Sketch a narrow curve above the top line of the brain. This will give your drawing a sense of dimension. Place your pencil on one end of the oval and draw a line that curves over the top line. It should be about above the original outline at its widest point.^[7]
   
   
   • If you don't want to give the brain dimension, you can skip this step.
3. Make a curve that looks like a C on the bottom bump. Now that you've drawn the basic outline for the brain, you'll start to draw lines that separate the different segments of the brain. Locate the bump you made on the bottom line and draw the base of a C shape so it fits into the bump. Extend the top of the C towards the middle of the brain.^[8]
   
   
   • The area of the bump will be the temporal lobe.
4. Trace a curved line from the outline to the middle of the line you just made. To make another segment of the brain, lightly draw a line from the original top of the brain. Make it curve slightly so it connects to the middle of the line you just drew.^[9]
   
   
   • This segment that you blocked off will be the frontal lobe.
5. Draw 2 to 3 long curved lines across each segment of the brain. Use a light touch to make several lines for each part. Try to mimic the shape of the individual segment. For example, the frontal lobe lines should make an arc up toward the line you drew through the brain while the lines near the back and bottom of the brain should curve down toward the base.^[10]
   
   
   • You'll use these faint lines as guidelines so it's easier to make the brain's wrinkles.
6. Add half-moon shapes along the lines to make them look wrinkled. Instead of leaving the smooth lines, make half-moon curves along the lines. The curves can go in different directions so the brain looks bumpy. Do this for each line to give the brain its distinctive texture.^[11]
   
   
   • Remember to go back along the sliver that you drew on top of the brain. Make small curves along this to make the brain appear bumpy.
7. Draw a stem and horizontal half-circle at the bottom center of the brain. To make the brain stem (medulla oblongata), sketch a narrow tube that extends from the bottom of the brain at the center. You can make it go down as far as you like. Then, draw a half-circle directly to the right of the stem. Make the half-circle go almost to that end of the brain.^[12]
   
   
   • To make the cerebellum more detailed, you can fill it with thin horizontal lines. Make the lines a little wavy so they look realistic.
8. Use crayons, markers, or colored pencils to add color to your drawing. You can use a single color and shade in the brain to add depth or use several colors to highlight different segments of the brain.
   
   
   
   • For example, use 5 or 6 colors if you'll be labeling the parts of the brain. The different colors can help the segments stand out.
9. Label the parts of the brain if you want to use it as an anatomy reference. If you're studying parts of the brain for a class, drawing the brain and labeling it is good practice. Refer to your textbook to label the:
   
   
   
   • Frontal lobe
   • Parietal lobe
   • Temporal lobe
   • Occipital lobe
   • Medulla oblongata
   • Cerebellum

[Edit]Video

[Edit]Tips

• If you're struggling to draw a brain, start with a really basic oval shape and draw squiggles or wrinkles all over it. As you become more confident, you can add more details.

[Edit]Things You'll Need

• Pencils or pens
• Eraser
• Paper
• Colored pencils or markers, optional

[Edit]Related wikiHows

• Draw Ears
• Draw a Nose
• Draw Realistic Hands

[Edit]References

[Edit]Quick Summary

1. ↑ https://drawinghub.com/tut/drawing-a-brain-for-kids-23196
2. ↑ https://youtu.be/FP2ibNRrA10?t=37
3. ↑ https://youtu.be/FP2ibNRrA10?t=49
4. ↑ https://drawinghub.com/tut/drawing-a-brain-for-kids-23196
5. ↑ https://youtu.be/FP2ibNRrA10?t=130
6. ↑ https://youtu.be/3Abwu2dnLN4?t=43
7. ↑ https://youtu.be/3Abwu2dnLN4?t=57
8. ↑ https://youtu.be/3Abwu2dnLN4?t=62
9. ↑ https://youtu.be/3Abwu2dnLN4?t=65
10. ↑ https://youtu.be/3Abwu2dnLN4?t=93
11. ↑ https://youtu.be/3Abwu2dnLN4?t=284
12. ↑ https://howtodrawa.net/brain/

source How to of the Day https://ift.tt/2oEjlNK

How to Trick or Treat

The jack-o-lanterns are carved, your costume is all picked out, and the sun is just starting to set on a spooky Halloween night. Now it’s time for the best part: trick or treating! Grab a group of friends, take a couple of flashlights, and get ready to indulge that sweet tooth. With a few simple tips, you can have a safe and successful trick or treating experience, complete with a whole pile of tasty candy. Happy Halloween!

[Edit]Steps

[Edit]Going from House to House

1. Start trick or treating at around 6 or 6:30. You probably want to start trick or treating as soon as you get home from school, but be patient! Have a good dinner to fuel you up for the night, and wait until the sun starts to get a little lower before you head out. Aiming to leave by 6 or 6:30pm is a good goal.
   
   • If you’re going with younger kids, you might need to leave even earlier to make sure you get home by bedtime.
   • Some smaller towns might have specified trick or treating times to follow. Ask your neighbors or check your local newspapers or bulletin boards to find out.
2. Wear or make a costume that you can move in easily. When you’re deciding what to dress up as, choose a costume that doesn’t drag on the ground, which might make you trip in the dark. Check the weather beforehand and make any costume adjustments necessary to keep you warm (or cool!) enough at night. Make sure your shoes are comfortable, too—you’ll be walking around in them all night! Avoid wearing masks, as well, which can make it hard to see. Go with face paint instead!^[1]
   
3. Bring a pillowcase or bag to hold candy. You can collect candy in whatever container you want, but a pillowcase tends to hold the most. You can also go with a pumpkin-shaped container or a Halloween tote bag for an option with more holiday spirit. Try to bring something you can hold on to easily, and make sure it’s strong enough to hold a few pounds of candy.
   
   • You can even choose a bag that matches your costume. If you dress up as a mermaid, for example, you could have a bag with shiny sequins on it like scales, or bring one shaped like a fish.
4. Go up to a house only if it has the lights on. Look for houses that have their front porch light on, with jack-o-lanterns and other Halloween decorations out front. This means that the people are home and celebrating—and ready to give you candy! If the house’s lights are off, they’re probably not around. Skip it and go on to the next one instead.^[2]
   
5. Take candy from a bowl on the ground, if it’s there. Some people will leave a bowl of candy on their front step when they know they’ll be out on Halloween night. In this case, just take one candy from the bowl (unless there’s a note saying you can take more) and move on.
   
   • It’s tempting to take a lot of candy when there’s no one there to see, but remember that other kids will be coming to the house after you. Let them get their share of candy, too.
6. Knock on the door or ring the doorbell. If no one answers your knock after a minute or so, you can try one more time. If no one answers after that, just go on to the next house. It might feel a little disappointing, but you’ll save time and get more candy if you move on fast.^[3]
   
   • Don’t touch any Halloween decorations or anything on their porch on your way up to the door. You don’t want to break anything!
7. Say “Trick or treat” and take one piece of the candy. When they open the door, smile and say “Trick or treat!” They’ll probably say “Happy Halloween!” or compliment you on your costume, then hold out the candy. Don’t hog the bowl to search for your favorite piece—just take the best one that you see on top. If you don’t like any you see, just grab a piece anyways to be polite. You can always trade later with your friends!^[4]
   
   • Just take one piece of candy, unless they say you can grab more.
   • You can say “trick or treat” in a loud voice, but don’t yell.
8. Thank them and wish them a happy Halloween. After you’ve grabbed your candy, look up and say “Thank you! Happy Halloween!” This shows that you’re polite and appreciative, and is especially important if you decide to come back next year. They might remember you and give you an extra piece!^[5]
   
9. Walk on the sidewalk to get to the next house. No matter how quickly you want to move on to the next house, stick to the driveways and sidewalks to get there. It’s rude to cut across people’s lawns or gardens, and you might trample their shrubs or flowers by mistake.^[6]
   
10. Go from door to door if you live in an apartment complex. Trick or treating in an apartment building can be just as fun as going around the neighborhood! You won’t have to worry about chilly (or hot) weather, plus you’ll fill up your candy bag more quickly without walking quite as much. Knock on doors with Halloween decorations and jack-o-lanterns to make sure the inhabitants are handing out candy.^[7]
    
    • Trick or treating in an apartment complex is also safer, since you won’t have to deal with traffic or dark streets.
11. Head home by 8:30pm, at the latest. You might want to stay out all night getting more candy, but houses will start to run out as it gets later. Some people might want to go to sleep, too! Aim to be home by 8:30 so you can start checking out your candy and get to sleep at a good time.
    
    • It can also get more dangerous to stay out past 8:30 or so, as fewer trick or treating groups are out.
    • Ask your parents beforehand if they want you home by a certain time.

[Edit]Trick or Treating Safely

1. Go in a group with two or more friends. Trick or treating by yourself isn’t any fun, and it’s not as safe, either. Instead, head out with 2-4 of your friends! If you’re under age 10, you should go with an adult, too.^[8]
   
   • In groups of 4 or more, try to stick with a buddy just in case you get separated from your main group.
   • Set up a designated meeting place in case anyone gets separated from your group. Bring cell phones if you have them, too!
   • You can even coordinate your costumes with your friends. Try going as the Three Musketeers, the Avengers, M&M’s, or characters from a TV show, book, or movie, like Harry Potter or Winnie the Pooh.
2. Trick or treat in a familiar neighborhood. By trick or treating in your neighborhood, you’ll be less likely to get lost and can easily head home as soon as you get tired. You’ll also be asking for candy from neighbors who know you, so they’ll be more likely to give you an extra candy or two!^[9]
   
   • Agree with your parents on a time to be home by.
   • To save time and avoid getting lost, plan out your route beforehand. You can even walk it a few times in the days before to ensure you know where you’re going.
3. Bring a flashlight or wear a glow necklace to light your way. Sidewalks and driveways can get dark as the sun falls. Bring along a flashlight or a glow stick so you can see, or wear glow necklaces for more convenience. The light will also help cars see you if you need to cross the street.^[10]
   
4. Walk, don’t run. It’s hard to see in the dark, and even though you might want to get to the next house as fast you can, tripping and skinning a knee will bring your night to a fast end. Make sure you’re walking and use basic street safety, too. Look both ways when you cross the street, and only cross at corners or crosswalks.^[11]
   
5. Don’t eat any candy until you can sort through it at home. Save your appetite and haul your loot home before you dig in. You want to be able to remove any candy that’s not in its original wrapper, or looks like it’s been opened. Another great reason to wait: trading! Once you’re home, dump out your candy and sort through it. Trade with your friends to get more of your favorite candies.^[12]
   

[Edit]Tips

• Don’t forget to fuel up before you head out! Have a good dinner with some protein, like chili or chicken, and plenty of fruits and veggies to make sure you stay energized while you’re out trick or treating.
• It’s acceptable to go trick or treating up through your mid-teens.

[Edit]Warnings

• Tell your group and the people at the house if you have any food allergies, especially to common candy ingredients like nuts or gluten.
• Be very careful when walking around at night, especially on Halloween. Always stay in a group, and look both ways before you cross the street.
• Never go into a stranger's home. Even if they say, "The candy is inside the house!" or, "There’s a haunted house inside! Come check it out!" never go in. Don’t say yes just to be polite; instead, say, "No thank you," and walk away.
• If you don't recognize a certain candy, or if it looks suspicious to you, throw it out! Bad people can hide deadly stuff in innocent-looking candy.

[Edit]Related wikiHows

• Make a Halloween Dummy
• Celebrate Halloween

[Edit]References

[Edit]Quick Summary

1. ↑ https://www.rd.com/advice/parenting/7-trick-or-treating-safety-tips/
2. ↑ https://health.clevelandclinic.org/ultimate-guide-safe-trick-treating-infographic/
3. ↑ https://www.mannersmentor.com/12-months-of-holidays/trick-or-treat-manners-for-kids-and-grown-ups
4. ↑ https://www.mannersmentor.com/12-months-of-holidays/trick-or-treat-manners-for-kids-and-grown-ups
5. ↑ https://www.mannersmentor.com/12-months-of-holidays/trick-or-treat-manners-for-kids-and-grown-ups
6. ↑ https://www.mannersmentor.com/12-months-of-holidays/trick-or-treat-manners-for-kids-and-grown-ups
7. ↑ https://www.apartmentguide.com/blog/trick-treating-apartment-building/
8. ↑ https://health.clevelandclinic.org/ultimate-guide-safe-trick-treating-infographic/
9. ↑ https://health.clevelandclinic.org/ultimate-guide-safe-trick-treating-infographic/
10. ↑ https://health.clevelandclinic.org/ultimate-guide-safe-trick-treating-infographic/
11. ↑ https://health.clevelandclinic.org/ultimate-guide-safe-trick-treating-infographic/
12. ↑ https://health.clevelandclinic.org/ultimate-guide-safe-trick-treating-infographic/

source How to of the Day https://ift.tt/2zsYBIv

How to Fix a Shoe Heel

Over time, the heels of your shoes will wear down from wearing and walking in them and you may need to replace them. If you have a high heel, then all you need is to put in a new tip before you can walk in them again. If the heel’s worn on a dress shoe, then you need to replace it in order to fix it. Your heels may also get dirty, scuffed, or torn while you wear them, but you can easily clean and make repairs on them.

[Edit]Steps

[Edit]Fixing a High Heel Tip

1. Get a set of replacement heel tips that match your heel. Replacement heel tips are small rubber pieces with metal dowels attached to them so you can put them in your shoe. You can either measure the height and width of your existing heel tip or buy a multipack that has different sizes in it. Make sure the color of the heel tip matches the one on your shoe or else it will clash.^[1]
   
   • You can buy replacement heel tips from a shoe store or online.
2. Pull out the tip of the heel with a pair of needlenose pliers. Grab the rubber end on the bottom of your high heel with a pair of needlenose pliers and slowly pull it straight out. You may have to rotate or shimmy the tip out of place since it will have a tight fit. Once you remove the tip from the shoe, you can throw it away.^[2]
   
   • If the rubber on the tip is completely worn away, then grab the metal dowel instead.
   • Don’t grab above the rubber tip since you could damage the actual heel of your shoe.
3. Push the new tip into the hole on the heel. Take one of the replacement heel tips and feed the end with the metal dowel into the hole on the bottom of the heel. Try to line up the shape of the tip and heel so it’s easier to make adjustments later on. Push the new tip in as far as you can by hand.^[3]
   
   • Set the shoe on a sturdy surface so you can push the tip in further.
   • Be careful not to apply too much force to your shoe heel since you could cause it to break off.
4. Tap the new heel tip into place with a hammer. Hold the shoe sturdy on a stable surface with your nondominant hand. Gently tap the bottom of the heel tip with a hammer to push it into the heel further. Continue tapping the heel tip slowly into the heel until the edges are flush with one another.^[4]
   
   • Don’t hit the hammer too hard since you could break the heel or bend the heel tip.
5. Turn the tip so it lines up with the rest of the heel. Grip the sides of the heel tip with your needlenose pliers and slowly turn the heel tip away. Keep rotating the heel tip in the heel until the curves on the back of the heel line up. Once the heel tip is aligned with the heel, you’re ready to wear your shoes again.^[5]
   

[Edit]Replacing the Heels on Dress Shoes

1. Buy a replacement heel for the shoe you’re repairing. You can usually find replacement heels online or at a shoe store. Compare the width, length, and thickness of the replacement heel to the one on your shoes to make sure they are the right fit. Make sure the bottom grip on the heel has the amount of traction you need so you don’t slip later on.^[6]
   
   • Replacement heels usually cost around $25 USD for a pair.
   • If you can’t find a replacement heel that matches the size of your shoe exactly, then get the next largest one so you can trim off the excess.
2. Pull the heel off of the shoe with a pair of pliers. Grip the rubber on the edge of your heel and slowly pull it backward. Hold the toe of the shoe down with your nondominant hand to get better leverage. Continue pulling the rubber part of the heel up until it comes off completely.^[7]
   
   • Many times, you only need to remove the rubber piece on the heel, also known as the top lifts. If the heel platform is damaged, then you also need to remove it the same way.
3. Use a belt sander to remove excess glue and flatten the bottom of the shoe. Put on safety glasses before using the belt sander so you don’t get any dust in your eyes. Turn on the sander and carefully hold the bottom of the shoe by the heel against the belt. Make sure the shoe bottom is flat against the sander so it smooths out a level surface for the new heel. Check the bottom of the shoe every few seconds to see if it’s flat.^[8]
   
   • You can also use 120-grit sandpaper, but it will be more difficult to get the heel perfectly level.
   • Don’t touch the belt sander while it’s still running since it will cause serious injury.
4. Apply contact glue to the shoe bottom and new heel and let it dry for 15 minutes. Contact glue adheres to itself and makes a firm connection between the pieces. Use the glue applicator to spread a thin layer of glue on the back of the replacement heel and the bottom of your shoe. Leave the glue to dry for at least 10-15 minutes so it gets tacky and adheres better.^[9]
   
   • You can buy contact glue from your local hardware or craft store.
   • Don’t push the heel onto the bottom of the shoe yet since the glue needs to set beforehand.
   • Work in a well-ventilated area since contact glue can create fumes that may cause irritation.
5. Push the heel onto the bottom of the shoe. After the glue dries for 10-15 minutes, line up the heel as best as you can with the bottom of the shoe. When you have the heel lined up, push it down onto the shoe so it makes a firm connection. Apply continuous pressure to the heel for 30-60 seconds so the heel and shoe stay in place. The glue will dry immediately so you can keep working on your shoe.^[10]
   
   • The heel will stick to the bottom of the shoe as soon as the contact glue touches, so make sure it’s lined up perfectly before pressing down.
6. Trim the heel around the bottom of the shoe if it doesn’t lie flush. Hold the blade of a utility knife against the side of your shoe next to the new heel. If the heel overhangs the side of the shoe, guide the blade through the rubber around the curves of the heel. Trim as close as you can to the side of your shoe to ensure that the heel doesn’t hang out the side.^[11]
   
   • Your knife can easily slip while trimming the heel, so work slowly and carefully so you don’t yourself.
7. Secure the heel in place with cobbler nails. Cobbler nails are only long, but they help hold your heel in place so it doesn’t come off. Place a nail it each of the front corners of the heel and gently tap them into the bottom of the shoe. Then evenly space 3-5 more nails around the back curve of the heel to help secure it in place.^[12]
   
   • You can buy cobbler nails at a hardware or shoe store.
   • You don’t have to nail down top lifts if you don’t want to, but it can make them more secure.

[Edit]Cleaning and Repairing the Material

1. Clean scuffs off of leather with toothpaste. Apply a pea-sized shape of any non-gel toothpaste onto the corner of a cleaning rag. Rub the toothpaste in circular motions on the sides of the heel that have scuffs on them. If you still notice the scuffs after your first application, then use another pea-sized bead of toothpaste and repeat the process again. Continue working until you can’t see the scuff marks anymore.^[13]
   
   • You may also use petroleum jelly in place of toothpaste if you want.
2. Wipe rubber heels with nail polish remover to remove marks. Wet the corner of a cleaning rag with nail polish remover, and wring out any excess. Rub the heels of your shoes in a circular motion to help remove any scuff marks from the sides. If the marks don’t come out at first, wet the rag again and continue wiping until they’re clean.^[14]
   
   • Avoid using an abrasive rag while you’re cleaning or else you may scratch and damage the rubber.
3. Rub walnuts on a wooden heel to remove scuffs and scratches. Use unshelled walnuts since they’re easier to break apart and use on your shoes. Hold the walnut against the wood on your heel and apply light pressure while you rub back and forth. The oil from the nuts will help lift and remove any scuff marks and make the shoe appear clean and shiny. Continue rubbing walnuts into the heels until you don’t notice any more marks.^[15]
   
   • Do not eat the walnuts you use to clean your shoes.
4. Use liquid leather to fill in holes on a leather heel. Liquid leather matches the texture and look of real leather so you can hide tears or holes. Use a small applicator, such as a cotton swab or popsicle stick, to scoop out a small bead of liquid leather and spread it over the damaged area on your heel. Press the textured sheet provided with the liquid leather over the area and let it dry for 24 hours. Slowly peel the sheet off the liquid leather once it’s dry so you can wear your shoes again.^[16]
   
   • You can buy liquid leather from a shoe or craft store.
   • Be sure to use liquid leather that matches the color of your heel so it doesn’t clash with the rest of your shoe.

[Edit]Tips

• If your heel is loose, you may be able to use super glue to secure it back in place for a short time, though it will be weaker and more likely to break again.
• If you don’t feel comfortable working on your own shoes, then take them to a professional cobbler so they can repair them for you.
• You can also buy high heel tips that slide onto the ends of your heels if you need to repair them quickly.

[Edit]Warnings

• Always wear safety glasses when using a belt sander.
• Never touch the belt on a belt sander while it’s moving since it can cause serious injury.

[Edit]Things You’ll Need

[Edit]Fixing a High Heel Tip

• Replacement high heel tips
• Needlenose pliers
• Hammer

[Edit]Replacing the Heels on Dress Shoes

• Replacement heel
• Pliers
• Belt sander
• Contact glue
• Utility knife
• Cobbler nails
• Hammer

[Edit]Cleaning and Repairing the Heel

• Walnuts
• Toothpaste
• Cleaning rag
• Nail polish remover
• Liquid leather

[Edit]References

1. ↑ https://youtu.be/IVg0VlhbdjE?t=206
2. ↑ https://youtu.be/IVg0VlhbdjE?t=130
3. ↑ https://youtu.be/zOIklQgJUbE?t=101
4. ↑ https://youtu.be/zOIklQgJUbE?t=115
5. ↑ https://youtu.be/IVg0VlhbdjE?t=318
6. ↑ https://youtu.be/ODsApyQ5BNo?t=101
7. ↑ https://youtu.be/6jSg4wMtOu0?t=126
8. ↑ https://youtu.be/6jSg4wMtOu0?t=180
9. ↑ https://youtu.be/ODsApyQ5BNo?t=883
10. ↑ https://youtu.be/ODsApyQ5BNo?t=1093
11. ↑ https://youtu.be/ODsApyQ5BNo?t=1555
12. ↑ https://youtu.be/_VYMNcEdQj0?t=57
13. ↑ https://www.hermoney.com/enjoy/fashion/quick-fixes-fashion-emergencies/
14. ↑ https://youtu.be/yiM-QxIOZAY?t=75
15. ↑ https://youtu.be/3C9On4Tnlvk?t=32
16. ↑ https://www.lollipuff.com/blog/39/fixing-a-worn-heel-with-a-leather-repair-kit

source How to of the Day https://ift.tt/34dVwLJ

How to Roast Pumpkin Seeds

Instead of throwing out the pumpkin seeds after a pumpkin carving session, try roasting them as a delicious snack instead! Rinse the seeds under cold running water before drying them and baking them in the oven until they're golden brown. You can add any sort of seasonings you desire, turning your pumpkin seeds into a spicy, sweet, or simply flavorful treat.

[Edit]Steps

[Edit]Removing the Seeds from the Pumpkin

1. Remove the top of the pumpkin to access the seeds. If you haven’t already done so, use a sharp cutting knife to cut a circle around the pumpkin’s stem. Make sure the lid is wide enough for your hand to fit through comfortably. Remove the lid once you’re done cutting it.^[1]
   
2. Use a large spoon to scoop the seeds from the pumpkin. The bigger the spoon, the more seeds you’ll be able to remove at once. Scrape the sides of the pumpkin to loosen the seeds and pulp, taking time to scoop out as many seeds as possible.^[2]
   
   
   • You can also use your hands or an object from a pumpkin carving kit.
3. Place all of the seeds and pulp in a large bowl. As you’re scooping out the seeds, place the seeds and pulp in a bowl big enough to hold everything. Remove large pieces of pulp from the seeds as you’re placing them in the bowl, but don’t worry about separating every single string.^[3]
   
   • If you’re removing the seeds from a smaller pumpkin, you may not need as large of a bowl.

[Edit]Washing and Drying the Seeds

1. Set the seeds in a colander and rinse them under cold water. This will help loosen the pulp and strings from the seeds, making it easier to clean them. Hold the colander full of seeds under the running water, using your hands to move the seeds around gently.^[4]
   
2. Pull the seeds out of the colander and place them on a towel. Once the seeds are mostly clean, take them out of the colander and set them on a clean kitchen towel. If there are any big strings still attached to the seeds, pull these off if possible.^[5]
   
   • You can also place the seeds on paper towels, though they may stick.
3. Pat the seeds dry using the kitchen towel. Spread the seeds out on the towel and gently blot the seeds to ensure they’re as dry as possible. Place the seeds in a bowl once they’re dry.^[6]
   
   
   • Instead of blotting the seeds, you can also shake them in the colander to remove excess water.
   • If the seeds are still damp when they go in the oven, they won’t roast well due to the moisture.

[Edit]Adding Seasonings

1. Toss the seeds with oil or butter. Once the clean, dry seeds are in a bowl, pour cooking oil or melted butter into the bowl so that the seeds are lightly covered. Use a large spoon to mix the seeds around with the oil or butter so that each seed is covered evenly.^[7]
   
   
   • Use canola oil, olive oil, or vegetable oil.
   • How much oil or butter you use will depend on how many pumpkin seeds you’re roasting, but it’s best to start with a small amount—you can always add more.
2. Add your desired seasonings. These could be seasonings such as Worcestershire sauce, garlic powder, paprika, salt, pepper—whichever seasonings are your favorite. Sprinkle the desired amount of seasoning into the bowl of pumpkin seeds.^[8]
   
   
   • Experiment with the type and amount of seasonings, sprinkling in small amounts before adding more.
   • For a simple yet tasty flavor, just add salt and pepper to your pumpkin seeds.
   • Consider adding seasonings like chili powder, Cajun seasoning, or crab seasoning for a stronger flavor.
   • Season with sugar, cinnamon, and nutmeg for a sweet snack.
3. Stir the pumpkin seed mixture thoroughly using a large spoon. Stir gently, making sure the pumpkin seeds are evenly coated with oil or butter and your desired seasonings. If you notice that many seeds don’t have seasoning on them, feel free to sprinkle a little bit more into the mixture.^[9]
   
   

[Edit]Baking the Seeds

1. Preheat the oven to and prepare a sheet pan. Lining your baking sheet with parchment paper will prevent the seeds from sticking the best, though you can also use aluminum foil. Once the oven is preheated, you're ready to roast your seeds.^[10]
   
2. Spread the seeds out evenly on the baking sheet. Pour the seasoned pumpkin seeds onto the lined baking sheet, using a spoon to spread them out. Try to make sure they aren’t clumped together and are laying flat so they roast evenly.^[11]
   
   • If your pumpkin seeds end up layered on top of one another, try baking them in two smaller batches to promote even roasting.
3. Bake the seeds for 20-30 minutes, stirring them occasionally. Remove the baking sheet from the oven every 10 minutes and move the seeds around using a wooden spoon or other kitchen utensil—this will help ensure each seed roasts evenly. Once the seeds look browned, they’re done!^[12]
   
4. Eat the seeds warm or let them cool to room temperature. Once the seeds have been removed and the oven is turned off, use a spatula to scoop the seeds into a bowl or other serving dish. You can eat them while they’re still warm from the oven, or let them sit for a few minutes until they’re cool.^[13]
   
5. Store the seeds in an airtight container for roughly 1 week. If you want to save your roasted pumpkin seeds, put them in an airtight container such as a mason jar, plastic bag, or piece of tupperware. The seeds will stay fresh for a week or so at room temperature, or you can place them in the freezer for up to a month.^[14]
   
   • If placing the seeds in the freezer, they should be in an airtight container as well.
   • Write the date on the container so you remember when the seeds were roasted.

[Edit]Things You'll Need

• Cutting knife
• Large spoon
• Large bowl
• Colander
• Towel
• Oil or butter
• Seasonings
• Sheet pan
• Parchment paper or aluminum foil
• Airtight container (optional)

[Edit]Video

This video shows you a different way to roast pumpkin seeds.

[Edit]Tips

• Place newspaper over your table surfaces for easier cleanup.
• Add your seasonings after roasting the seeds, if desired.
• The pumpkin seeds can also be added to a salad or soup.
• Try using a toaster oven for smaller amounts of pumpkin seeds.

[Edit]Related wikiHows

• Dry Pumpkin Seeds
• Roast a Pumpkin
• Carve a Pumpkin
• Make Pumpkin Bread
• Make Pumpkin Pie Straight from the Pumpkin
• Roast Chestnuts
• Eat Pumpkin Seeds
• Cook With a Convection Toaster Oven

[Edit]References

[Edit]Quick Summary

1. ↑ https://www.tasteofhome.com/article/roast-pumpkin-seeds/
2. ↑ https://www.tasteofhome.com/article/roast-pumpkin-seeds/
3. ↑ https://www.tasteofhome.com/article/roast-pumpkin-seeds/
4. ↑ https://www.jessicagavin.com/how-to-roast-pumpkin-seeds/
5. ↑ https://www.101cookbooks.com/toasted-pumpkin-seeds/
6. ↑ https://www.101cookbooks.com/toasted-pumpkin-seeds/
7. ↑ https://www.tasteofhome.com/article/roast-pumpkin-seeds/
8. ↑ https://www.jessicagavin.com/how-to-roast-pumpkin-seeds/
9. ↑ https://www.tasteofhome.com/article/roast-pumpkin-seeds/
10. ↑ https://www.jessicagavin.com/how-to-roast-pumpkin-seeds/
11. ↑ https://www.tasteofhome.com/article/roast-pumpkin-seeds/
12. ↑ https://www.jessicagavin.com/how-to-roast-pumpkin-seeds/
13. ↑ https://www.tasteofhome.com/article/roast-pumpkin-seeds/
14. ↑ https://minimalistbaker.com/how-to-roast-pumpkin-seeds/

source How to of the Day https://ift.tt/2NpmY2b