How to Fold Paper for Tri Fold Brochures

A tri fold brochure is a great way to organize a lot of information onto a single sheet of paper. This type of leaflet is incredibly easy to make and, once you get the technique down, you’ll be able to branch out into more unique styles like the z-fold brochure.

[Edit]Steps

[Edit]Folding Your Brochure

1. Get an sheet of paper. If you plan on printing your brochure, you should design it on your computer first, then print it out. Click here to learn how. If you wish to write and draw on your brochure by hand, then get out your paper and keep on reading!
   
   • Heavier paper, such as cardstock will look nicer, but you can use other types of paper too.
2. Place the paper on a flat surface and orient it landscape style. The short edges should be on the left and right sides of the paper. One of the long edges should be facing you. If you have already written on the paper, make sure that the side you want to be on the inside is facing you.
   
   
   
3. Divide the paper into thirds using a pencil and ruler. Place a ruler along the top edge of the paper. Make 2 marks along the top edge of the paper. The first mark should be 1/3 of the way across the ruler, and the second mark should be 2/3 of the way across.^[1]
   
   
   • You can eyeball this. If you want to be more precise, use a calculator to figure out exactly what 1/3 of 11 is.^[2]
   • Consider making the second mark a few millimeters closer to the right side of the paper. This will make the panel a little bit narrower and easier to fold.^[3]
4. Fold the right side of the paper to the middle using the pencil mark as a guide. Slowly fold the right side of the paper 1/3 of the way, using your pencil mark as a guide. Make sure that the top and bottom edges of the top layer of paper match up with the bottom layer of the paper. Sharpen the crease by running your fingernail across it.^[4]
   
   
   • If you made both marks at exactly the 1/3 and 2/3 points, then the edge should align with the first mark that you made.
   • If you made the second mark closer to the right side of the paper, then the edge of the paper won't quite reach the first mark that you made.
5. Repeat the process for the left side of the paper. Bring the left side of the paper just past the middle, using the pencil mark as a guide. Make sure that the edge aligns with the folded edge on the right side of the paper. Flatten the crease, then sharpen it with your fingernail.
   
   
6. Flatten and crease the side edges once more, then erase the pencil marks. Run your fingernail up and down along the left and right folded edges of your paper. Unfold your brochure and erase the pencil marks you made earlier.
   
   
7. Write on your brochure as desired. Most people make the cover on the front of the left side panel, but you can make it on the right instead. When you fold the brochure back up, fold the side with the cover last so that it ends up on top.
   

[Edit]Designing Your Brochure Digitally

1. Create a new landscape style document with 3 columns. Open up a new document on a word editing program. Change the paper orientation to landscape style, then add 3 columns. Each of these columns (including the margins) will create 1 panel.^[5]
   
   
   • Make sure that the paper size is set to .
   • How you do this depends on the type of image editing program that you are using. Refer to the user manual/help section for your program.
   • Alternatively, you can look for a tri fold brochure layout in the templates section of your word editing program.
2. Choose a side panel to be on the inside of your brochure. A tri fold brochure is composed of 3 panels: a left, middle, and right. The left and right panels overlap each other. You can have either the left or right panel be on the inside; it does not matter.
   
   • If you fold the left side of the paper first, that panel becomes the inside panel. If you fold the right panel first, then that panel becomes the inside panel.
3. Make the inside panel narrower than the other 2 panels. Paper takes up space when it is folded. If you don't make 1 of the panels narrower, than the brochure won't look even once you fold it. Make 1 of the side panels wide, and the other 2 panels wide.^[6]
   
   
   • You may be able to adjust the column widths using the settings. If you can't find it, move the sliders along the ruler at the top of the page.
4. Add a second page for the back of your brochure. Your brochure will be composed of 6 panels altogether, with 3 in the front of the brochure and 3 in the back. You can write something on all 6 of these panels, or you can leave the back-center panel (panel 5) blank.^[7]
   
   
   • Panels 1, 2, and 3 will be printed on the front. Panels 4, 5, and 6 will be printed in the back.
   • How you add a second page depends on the program. Typically, you can just go to the bottom of the last column, and insert a page break.
5. Double the margins between the columns. A margin may look pretty between 2 columns, but once you fold the brochure, those margins will shrink to on each panel. This may be too narrow for you. Decide how wide you want the margins to be, then double that. Adjust the gutters (spaces) between the columns accordingly.^[8]
   
   
   • How you do this depends on what word editing program you are using. In most cases, you'll have to look for "columns" in the toolbar. Refer to the help manual for your program.
6. Create text and add images to your brochure as desired. Think ahead to how your brochure will look once it is folded. Panels 1, 2, and 3 will be on the inside of the brochure, and they'll only be visible once you open them. Panel 5 will be in the back-center. Panel 4 and 6 will be folded over each other. The one that you decide to put on top will make the cover.^[9]
   
   • You can make panel 4 the cover or you can make panel 6 the cover.
7. Print the brochure out. You will need to print the front out first, then print the back on the same sheet of paper. If you are using a top loading printer, you will need to flip the paper over so that the blank side is facing you. If you are using a bottom loading printer, simply feed the paper back into the printer, with the printed side facing up.
   
   • If you are making multiple brochures, you can photocopy your original brochure to save printing time. Remember to use the double-sided photocopy option.
   • Some printers have a brochure option. Take advantage of this.
8. Fold the paper into a brochure. Turn the paper so that panels 1, 2, and 3 are facing you. Fold the narrower panel down first, then fold the outer panel on top of it. Make sure that the side edge of the outer panel touches the folded edge of the inside panel. Run your fingernail along the creases to make them nice and sharp.
   
   
   • For more detail, refer to the process described in the previous method.

[Edit]Creating Other 3-Fold Brochures

1. Create a simple tri fold brochure by overlapping the edges of the paper. Orient your paper landscape style. Bring the left and right sides of the paper towards the middle so that they overlap each other completely. Make sure that the side edges are aligned with the folded edges, then flatten the paper. Run your fingernail across the folded edges to sharpen them.
   
   
2. Convert a tri fold into a z-fold brochure by folding the last panel back. Create a basic tri fold brochure, but make all 3 panels the same width. Take 1 of the side panels, and fold them to the back instead of to the front. If you were to look at your brochure from the top, you'll see a Z-shape.^[10]
   
   
3. Fold both side edges to the center to make a gate fold brochure. Orient your paper horizontally and find the center. Fold the left and right side edges towards the center. You will end up with 2 narrow side panels and 1 wide panel in the center.^[11]
   

[Edit]Video

[Edit]Tips

• Save printer ink by printing your first brochure, then photocopying the rest.
• Heavier paper creates nicer, more durable paper than standard printer paper. You can find this paper alongside other printer paper in office supply stores.
• Practice printing and folding your brochure before making the final one.
• Do not skimp on print quality. Use the highest settings you can. For even better results, consider going to a print shop.

[Edit]Things You'll Need

[Edit]Folding Your Brochure

• paper
• Ruler
• Pencil
• Calculator (optional)

[Edit]Designing Your Brochure Digitally

• paper
• Computer
• Word editing program
• Printer
• Calculator (optional)

[Edit]Creating Other 3-Fold Brochures

• paper

[Edit]Related wikiHows

• Make a Travel Brochure
• Fold a Paper Into Thirds
• Make a Personal Wedding Ceremony Booklet

[Edit]References

[Edit]Quick Summary

1. ↑ https://www.youtube.com/watch?v=AkLt1bL0i88&feature=youtu.be&t=4m20s
2. ↑ https://www.universalprinting.com/foldingguides.aspx
3. ↑ https://www.universalprinting.com/foldingguides.aspx
4. ↑ https://www.youtube.com/watch?v=AkLt1bL0i88&feature=youtu.be&t=4m40s
5. ↑ https://www.displays2go.com/Guide/How-Create-Pamphlets-Flyers-Word-25
6. ↑ https://99designs.com/blog/tips/folded-brochure-guide/
7. ↑ https://www.displays2go.com/Guide/How-Create-Pamphlets-Flyers-Word-25
8. ↑ https://99designs.com/blog/tips/folded-brochure-guide/
9. ↑ https://99designs.com/blog/tips/folded-brochure-guide/
10. ↑ https://www.prepressure.com/finishing/how-to-fold-a-brochure
11. ↑ https://www.prepressure.com/finishing/how-to-fold-a-brochure

source How to of the Day https://ift.tt/35K6TOE