How to Give Plants Iron

If your plants are low in iron, you may notice that the leaves start to take on a yellow, spidery look. Luckily, there are a number of different ways to treat this, depending on the severity of the problem. For a temporary way to treat smaller plants and shrubs, you can spray iron directly on the leaves. If you'd prefer to treat the soil, you can use chelated iron for an inexpensive fix, or ferrous sulfate for a longer-lasting treatment.

[Edit]Steps

[Edit]Spraying the Leaves

1. Buy a chelated iron spray or make your own solution. Chelated iron sprays are available at most well-stocked garden centers and home stores. However, if you'd like to make your own inexpensive version, you can dissolve of ferrous sulfate in of water. This will create a 0.5% solution, which is safe to apply to plants. Pour it into a pump sprayer, like the kind you'd use to spray liquid fertilizer or insecticide.^[1]
   
   • If you buy a commercial product, be sure to carefully follow the application instructions on the label.
   • If you're making your own spray, choose ferrous sulfate that is 20-22% iron.
   • Try adding 2-3 drops of dishwashing soap for every of either commercial or homemade spray. This will help the spray adhere to the plant's leaves.
2. Do this treatment during the spring or summer so it will be effective. In order for an iron spray to improve your plant's health, you have to use it during the growing season. You can spray new growth starting in the early spring, all the way through full foliage in the late summer.
   
   • Once the fall hits, the plant will start to become dormant, and it will remain dormant through the winter. During this time, the iron won't have much effect, even if the plant retains its leaves through the winter.^[2]
3. Choose an evening or cool day so you don't burn the leaves. If you apply chelated iron to the plant's leaves at mid-day when it's hot out, you could burn the plant's foliage. Instead, wait for a cool, cloudy day to spray the iron. If the weather is warm and isn't forecast to cool down anytime soon, wait until the evening, when it should be a little cooler out.^[3]
   
   • If the iron burns the leaves, the edges will start to curl and turn brown.
4. Coat the leaves of the plant generously with the mixture. If only part of the plant seems affected, focus mostly on that area. However, since this is a mild treatment, it's okay if some of the spray gets on leaves that aren't showing signs of iron deficiency.^[4]
   
   • It's fine if some of the spray gets onto the ground around the plants. However, since the solution isn't strong, it's not likely to have much of an effect on the iron content of the soil.
   • You'll likely notice results in just a few days.
5. Repeat the treatment in a week or two if you need it. Iron sprays are just a temporary fix for your plants. The yellowing might improve after a few days, but if you notice it returning, or if new leaf growth looks yellow, you'll need to spray the plants again.
   
   • Even though this isn't a long-lasting fix, it can help keep your plant healthy while you work to improve the soil.

[Edit]Treating the Soil with Chelated Iron

1. Purchase powdered or granular chelated iron. You'll need about of iron fertilizer for every of soil you're treating. Just be sure the chelate you choose contains FeEDDHA. Other options won't be as effective, especially in soils with an elevated pH level.^[5]
   
   • Both powdered and granulated iron will be easy to mix into the soil, and they'll be readily absorbed by the plants. You can find chelated iron at many big box stores, lawn and garden stores, or online.
   • Make sure the label indicates that all of the iron in the supplement is chelated. Some iron supplements will say "chelated" on the label even some of the iron is in a different form.^[6]
   • Also, if the supplement you're using contains a fertilizer, be sure it doesn't have phosphorus in it. Too much phosphorus in the soil can contribute to iron deficiency.^[7]
2. Apply the treatment in the fall or the spring. It's best to either treat the soil in the spring, right at the start of the growing season. However, you can also use chelated iron in the fall just before the plant goes dormant. In the spring, the plant will be pulling nutrients from the soil as it prepares to bud. If you apply it in the fall, the iron will be able to gradually absorb into the plant's roots throughout the winter.^[8]
   
   • Either way, you'll probably have to reapply the treatment once a year, so just pick the time of year that will be most convenient for you every year.
3. Sprinkle the iron around the roots of the plants, then water them. Following the application instructions on the container, simply shake the chelated iron directly around the base of each of the plants you need to treat. Then, water the ground thoroughly.^[9]
   
   • If you'd prefer, you can also dissolve the iron in water, then spray that around the base of the plant.
   • This is a good option for treating shrubs, smaller gardens, or individual trees, but since chelated iron can be expensive, it's not ideal for treating larger areas.
4. Repeat the treatment once a year or as needed. Treating the soil with chelated iron will usually help correct and prevent iron deficiency for about a year. However, if you treat the plant in the spring and it's still showing symptoms, you may need to treat the plant again later in the growing season.^[10]
   

[Edit]Adding Ferrous Sulfate to the Soil

1. Mix equal parts elemental sulfur and ferrous (iron) sulfate. Purchase both of these ingredients from a lawn and garden store. Then, pour an equal measure of each into a large bucket or bin.^[11]
   
   • Don't mix these ingredients in any pots or bowls that you plan to prepare food in later on.
   • Read the label to make sure you're choosing a ferrous sulfate product that contains a high concentration of iron.
   • Wear gloves and eye protection when you're working with iron sulfate. Also, work in a ventilated area, and consider wearing a respirator if you'll be working with large amounts.^[12]
2. Dig a trench around the plant's base if you're treating a shrub. For larger shrubs, measure about away from the base of the plant. Then, use a handheld hoe to dig a hole about deep, going all the way around the base of the plant.
   
   • Be sure not to dig so deep that you damage the plant's roots.^[13]
   • Check with your local utility companies before you dig in an area that might have utility lines.
3. Dig holes along the crown line if you're treating a tree. The crown line, also known as the drip line, is where the outer edge of the plant's leaves stop. Use an augur to make holes that are wide and about deep. Space the holes about apart. The amount of holes you'll need depends on the diameter of the plant's trunk:^[14]
   
   • 4 holes for a diameter
   • 6 holes for a diameter
   • 8 holes for a diameter
   • 12 holes for a diameter
   • 16-24 holes for an diameter
   • 25-30 holes for a diameter
   • 30-40 holes for a diameter
   • 40-50 holes for a diameter
4. Fill the holes or trench with the ferrous sulfate mixture. If you dug holes to treat a tree, pour in enough of iron to fill the hole up to about from the top If you dug a trench, pour of ferrous sulfate into the bottom.^[15]
   
   • Be careful not to get the iron on your skin or in your eyes, and avoid breathing it in.
5. Top the holes or trench with the remaining dirt. If you dug holes, fill in the last with some of the dirt that you removed. If you dug a trench, loosely pack it all the way up to the top with the dirt. If you'd like, you can then water the area.^[16]
   
   • If you used an augur to make your holes, it should have removed the dirt, rather than just compacting it. That will ensure you have the excess soil you need to fill the holes back in.
   • This treatment will typically last up to 2-4 years, so you shouldn't have to repeat the treatment until the next time the plant shows symptoms.

[Edit]Tips

• If your plants are iron deficient, the leaves will turn yellow with dark green veins, giving them a spidery look. If the iron deficiency isn't treated, the leaves might then start to turn white and die.^[17]
• If you're not sure if your plants are iron deficient, test the pH of your soil. If the pH is above 7.0-7.5, it's likely that you have an iron deficiency. For more thorough soil testing, check with your local agricultural extension center.^[18]
• Iron deficiency might show on the whole plant, a single branch, or even just a few leaves.^[19]
• If you have a large tree that needs to be treated, contact an arborist about injecting the tree with iron.^[20]

[Edit]Warnings

• Overwatering your plants can cause iron deficiency or make it worse.^[21]
• When you're working with iron supplements, be careful not to spill it on your sidewalks or other surfaces, as it could leave a stain. ^[22]
• Some folk remedies recommend burying scrap iron under a tree to fix an iron deficiency. However, it's not a good idea to bury sharp, rusted metal in your lawn.^[23]
• If you'll be working with iron (ferrous) sulfate or chelated iron, wear gloves and safety goggles, and work in a ventilated area or wear a respirator. If either of these substances gets into your eyes, flush them with water for at least 15 minutes. If they get on your skin, wash it thoroughly with water. ^[24]

[Edit]References

1. ↑ https://forestry.usu.edu/trees-cities-towns/tree-care/preventing-iron-chlorosis
2. ↑ https://forestry.usu.edu/trees-cities-towns/tree-care/preventing-iron-chlorosis
3. ↑ https://extension.arizona.edu/sites/extension.arizona.edu/files/pubs/az1415.pdf
4. ↑ https://forestry.usu.edu/trees-cities-towns/tree-care/preventing-iron-chlorosis
5. ↑ https://forestry.usu.edu/trees-cities-towns/tree-care/preventing-iron-chlorosis
6. ↑ https://extension.arizona.edu/sites/extension.arizona.edu/files/pubs/az1415.pdf
7. ↑ https://todayshomeowner.com/how-to-treat-iron-deficiency-in-plants/
8. ↑ https://www.hobbyfarms.com/a-quick-way-to-boost-iron-in-your-soil/
9. ↑ https://forestry.usu.edu/trees-cities-towns/tree-care/preventing-iron-chlorosis
10. ↑ https://www.hobbyfarms.com/a-quick-way-to-boost-iron-in-your-soil/
11. ↑ https://forestry.usu.edu/trees-cities-towns/tree-care/preventing-iron-chlorosis
12. ↑ https://southernag.com/wp-content/uploads/2014/06/Ch-Liquid-Iron-1.pdf
13. ↑ https://forestry.usu.edu/trees-cities-towns/tree-care/preventing-iron-chlorosis
14. ↑ https://forestry.usu.edu/trees-cities-towns/tree-care/preventing-iron-chlorosis
15. ↑ https://forestry.usu.edu/trees-cities-towns/tree-care/preventing-iron-chlorosis
16. ↑ https://forestry.usu.edu/trees-cities-towns/tree-care/preventing-iron-chlorosis
17. ↑ https://todayshomeowner.com/how-to-treat-iron-deficiency-in-plants/
18. ↑ https://forestry.usu.edu/trees-cities-towns/tree-care/preventing-iron-chlorosis
19. ↑ https://forestry.usu.edu/trees-cities-towns/tree-care/preventing-iron-chlorosis
20. ↑ https://forestry.usu.edu/trees-cities-towns/tree-care/preventing-iron-chlorosis
21. ↑ https://forestry.usu.edu/trees-cities-towns/tree-care/preventing-iron-chlorosis
22. ↑ https://todayshomeowner.com/how-to-treat-iron-deficiency-in-plants/
23. ↑ https://www.hobbyfarms.com/a-quick-way-to-boost-iron-in-your-soil/
24. ↑ https://southernag.com/wp-content/uploads/2014/06/Ch-Liquid-Iron-1.pdf

source How to of the Day https://ift.tt/3s4CHHp